Cleaning a Crystal Chandelier with Brilliante Chandelier Cleaner is simple. From preparation to clean-up, you can restore your Crystal Chandelier or Lighting fixture in just four steps


1. Turn off / unplug fixture and allow light bulbs to cool. Tighten light bulbs to prevent moisture from     entering sockets.

2. Place a towel or absorbent floor covering underneath the fixture to catch excess solution which may     drip during the drying process.

3. Hold sprayer 3-6 inches away from fixture. Generously spray fixture starting from the bottom,     working your way up and then down until all surfaces are thoroughly coated. Keep the fixture     stationary while you maneuver around it.

NEVER SPIN YOUR CHANDELIER AS THIS MAY CAUSE THE CHANDELIER OR ITS CRYSTALS TO FALL.

4. Allow fixture to drip-dry for 30-60 minutes. Use a chamois to absorb any excess accumulation of     cleaning solution. Allow the entire fixture to dry thoroughly before turning on again.



Note: If fixture is especially dirty, a second coat may need to be applied. Once fixture is clean, a quick application every other month is all it takes to keep your fixture Brilliantly clean.